ORCAVUE GLAMBOT NOW AVAILABLE FOR PREORDER!
$11,990
$12,490
OrcaVue’s Glambot is finally complete and has begun shipping. Orders placed now are expected to ship January 2025. Lock in your place in line with a fully refundable deposit.
FREE SHIPPING in the continental US.
Reserve with a fully refundable deposit of:
$1,000.00
Glambot Specs*
Horizontal Reach : 5′ 6″ or 11′ side-to-side
Max Height : 9′ (280 cm)
Suggested Footprint : 12′ x 12′
Robot Weight : 129 lbs (59 kg)
Road Case Weight : 70 lbs (32kg)
Road Case Dims : 48″W x 20″L x 26.5″H
Setup Time : Less than 5 minutes
Power Source : US Standard, 120VAC
AC Cord Length : 15’ (4.5m)
Record Cues : Light and Sound
Paths: Predefined (16 min)
Path Adjustments : Speed, Direction, Height
*Subject to minor changes
Highlighted Features
Travel – Glambot easily packs down into travel mode, and stays safe while on the go with an included wheeled road case.
3-Minute Setup – User friendly and tool-less design requires just minutes to setup. Send out your hired booth operators with confidence.
Connectivity – Built-in router provides seamless internal connectivity and the option for you to host your own internet at your event. Just add a SIM card from your preferred wireless provider, or connect to the venue WIFI/LAN.
Safety – Glambot provide visual and audio cues to provide guests and operators with an enhanced and safer experience.
YOU SHOULDN'T NEED A TECH WIZARD TO OPERATE A GLAMBOT
Time is money. Glambot set up and operation shouldn’t be hard. You deserve a glambot that transports, sets up, and operates simply.
ENGINEERED WITH THE OPERATOR IN MIND
The OrcaVue Glambot wasn’t just made for you… it was made for your staff. Send out employees with confidence knowing they are running your events with a unit that can be set up simply and in under 3 minutes.
WHY ORCAVUE GLAMBOT?
Plug-And-Play
No tools required. Glambot sets up in under 3 minutes.
Preloaded Camera Paths
Adjust paths on the fly at your events for different crowd sizes and heights.
5' 6" ft Reach
Size matters. More camera movement gives you better shots.
Worry-Free Power & Data
Hardwired power/data connections to camera & sharing station.
No Tech-Wizard Required
Internal router provides easy cellular*/wifi/LAN connectivity.
Integrated Road Case
Glambot packs down to stay safe while in travel mode.
Automatic Safety Notifications
Light and sound activated safe operating signals.
GoPro/iPhone Compatible
Capture content with cameras that you already own.
Single Click Operation
Keep operation simple with just the push of a button.
Internal & External Power Outlets
Reduce cables & easily connect third-party accessories.
HOW DOES THE ORCAVUE GLAMBOT WORK?
HOW TO SET UP THE GLAMBOT
HOW TO RECONFIGURE THE GLAMBOT
HOW TO GET YOUR PHOTO BOOTH COMPANY READY FOR GLAMBOTS
STEP 1
Pre-order your Glambot to make sure you can be among the first companies to market!
STEP 2
Market your Glambot! Start creating pages on your website targeting keywords surrounding “Glambot+your service area.”
STEP 3
When your order is ready to ship, we will contact you to complete your Glambot purchase. Orders placed today are expected to ship January 2025.
Pre-Order Your Glambot NOW!
✔ Reserve the lowest price available for the ORCAVUE GLAMBOT in 2024
✔ All deposits are fully refundable.
✔ GET FIRST ACCESS TO GLAMBOT MARKETING MATERIALS
Glambot | Frequently Asked Questions
How many moves/paths are included with the OrcaVue GlamBot?
OrcaVue GlamBots have 16 unique camera paths. Each of these can then be adjusted to accommodate four different heights and three different speeds. Most paths can also be played in the reverse direction; we call this mirroring. You should be aware that other companies typically count the mirrored version as a separate camera path. If we did that, our Glambot would have 25+ paths!
How difficult is it to set up an OrcaVue GlamBot?
OrcaVue GlamBots can be set up in three minutes or less–no tools required!
To do so, perform the following steps:
- Move the road case containing the packed GlamBot into position
- Tip the road case up onto the robot’s exposed feet
- Remove the clamshell sides of the road case
- Adjust the leveling feet
- Pull the built-in display back into the working position
- Plug the GlamBot into an AC power connection using the supplied 15 ft cord
- Attach a GoPro to the top of the arm
- Connect the GoPro to the USB-C port on the side of the head
- Connect an iPad to the USB-C port on the rear of the robot
- Place a tape mark (or small rug) 8 ft in front of the robot to indicate where subjects should stand
- Start your preferred app on the iPad
- Press the unfold button on the operator display to put the arm into its initial position
- Select a move and then press start in the app you are using!
Are OrcaVue GlamBots difficult to operate?
OrcaVue GlamBots were designed for simplicity. Operators simply select a “move” from a list pre-programmed paths. Most moves also allow the operator to select the height of the subject and the number of people in the shot to keep it from zooming in too close. The connected app start the robot, records the move, and then makes it available for sharing.
What happens if the GlamBot arm is bumped out of place?
The GlamBot arm is designed to “give” if it encounters an obstruction. Often it can simply readjust after such an encounter. But in the case that it needs to be “re-homed,” simply place the arm into glide mode by pressing the red switch at top of arm for half a second. A buzzer will sound and the LED light will blink several times to indicate that the arm is about to go limp. When it does, simply push the arm back into the storage bracket, watching the two indicators which illuminate when the arm is completely reseated. When they are both green, press the red button again. The arm will re-energize and is now ready to return to operation.
Is the OrcaVue GlamBot shipping?
Yes! Orders placed today are expected to ship January 2025.
What cameras can be used with the OrcaVue GlamBot?
The OrcaVue GlamBot was designed with the expectation that it would be used with a GoPro 12. When the apps catch up, it should also work with the GoPro 13.
Why doesn’t it work with mirrorless/DSLR cameras?
Mirrorless cameras and DSLRs struggle to maintain focus at the rate the Glambot arm travels. Counteracting this would require adding a motorized focus puller, which would then turn everything into an elaborate science project, exactly the opposite of what we were working towards. We think that you will find the quality surprisingly good.
What should photo booth operators charge for GlamBot activation services?
Different regional markets will have fluctuating demand and supply. Therefore, you’ll need to test the pricing in your market to find the optimum level. We’d recommend experimenting with $2-5,000 per day for private events and $3-8,000 per day for corporate events.
What photo booth apps can be used with the OrcaVue GlamBot?
At the moment, we mostly use SnapPic. That said, any app that can work with a GoPro and start an OrcaVue 360 platform should be able to start the Glambot, although the level of customization and integration would vary. These apps include: SnapPic, the Glambot.App, TouchPix and Gruvy. Plans are in the works to add our extended protocol to SnapPic, Glambot.app and Curator. This will allow selection of moves and greater control of the robot directly from within the app.